Water Hardness Strips: 0 - 425 PPM

Package Size: 50 Strips per Bottle
 
Serim Water Hardness Test Strips are perfect for testing water hardness. They measure total hardness expressed as calcium carbonate (CaCO3) concentrations in water of 0 - 425 ppm with color block increments at 0, 25, 50, 120, 250, and 425 ppm.
 
Free Shipping
 

Price: $18.50

WHAT does this product do?
Serim® Monitor™ for Water Hardness strips give a semi-quantitative indication of total harness expressed as calcium carbonate (CaCO3) in the water used for cleaning and disinfecting food products and equipment.
 
WHY should I use this product?
“Hard water can result in excessive power consumption, poor cleaning performance, and increased chemical consumption and biofilm formation.” Water hardness can drastically reduce the effectiveness of cleaning products. Additional amounts of cleaning products must be used to achieve satisfactory results. Hard water also allows film and scale formation to build up on surfaces. This increases the difficulty of cleaning, and “can interfere with heat transfer and reduced efficiency of heating equipment.” Serim Monitor strips yield quick indication of the level of water hardness.
 
WHERE do I use this product?
Test a sample of the water at the post-softener stage of the water treatment process to make sure that the softener is removing calcium and magnesium. You can also test the incoming (feed) water to determine the initial hardness.
 
DIRECTIONS FOR USE:

Test Method:  Immersion

Test Strip Technique: Immerse indicator pad in water sample (or insert indicator pad in stream). Remove immediately and shake excess water from strip.
 
Results: Wait 15 seconds and compare the color of the indicator pad to color chart.
 
SERIM MONITOR™ FOR QAC FEATURES AND BENEFITS
 
  Features                                                      Benefits
Designed specifically for the food processing industry
· Color blocks at levels of importance to the food processing industry
Ready-to-use strips, simple procedure
· No preparation or mixing of reagents
· No calculation or “drop counting” needed  
Quick, semi-quantitative results in 15 seconds
· No preparation or mixing of reagents

·         No calculation or “drop counting” needed

Simple to interpret color blocks
· Accurate and consistent results minimize variation between readers
· Color of indicator pad is directly compared to color blocks on bottle label
Consistent color reactions
· Results not affected by aging during the shelf life of the product

Each bottle clearly labeled with:

·         Lot number

·         Expiration date

· Traceability of product from manufacturing to final user
· Leaves no doubt as to the age or integrity of the product
 
  • image
  • image
  • image
  • image
  • image